ArtRes's package of 2 x 0.47 l bottles and accessories in the picture + instructions in English.
MEASURE
With gloves on, pour equal amounts of resin and hardener into the mixing cup.
You can check out our resin coverage calculator to determine how much you need.
TIP - Mix a little more than you think you need because you want to cover your work completely in one go and not have to mix more later.
MIX CAREFULLY AND FOR A LONG TIME
Mix really well - at least 3 minutes. Scrape the sides and bottom to make sure you are thorough (unmixed material will leave sticky spots that won't harden). Once the resin and hardener are combined, you have about 45 minutes of working time before the resin thickens and hardens.
DISSEMINATION
After making sure your work is flat (use a cotton pad), pour ArtResin® material over your work. Do not be afraid! It will start to smooth out on its own and you can apply it in place. Let the resin run over the edges and then just use a brush or spatula to clean it up. You will notice bubbles starting to rise to the surface. Many of them will self-pierce, but you can also pierce them yourself for a flawless finish - our artist torch/toho works great for this (see our how-to videos for details).
TIP - Wood panels are best suited for large works instead of canvas, as they do not sag under the weight of the resin.
WAIT
ArtResin® must be in a dust-free environment for several hours until it hardens.
After about 8 hours it will be sticky, but you can pour another layer if necessary.
After about 12 hours it is touch dry, and
Within 24 hours it is 95% cured.
It is fully cured within 72 hours.
CLEANING - If you want to reuse your mixing tools, wipe them with a paper towel before the resin dries.
Easy to use 1:1 mixing ratio; covers approx. 2 sq ft UV and HALS stabilized for unparalleled yellowing protection Non-toxic. Safe for home use when used in a well ventilated area. Well, VOCs. Well BPA. Well fumes. Non-flammable. Certified food safe. High-gloss. Self-levelling. Formulated specifically for art. Made in the USA. Be careful, you'll get hooked on it.
ArtRes's package of 2 x 0.47 l bottles and accessories in the picture + instructions in English.
MEASURE
With gloves on, pour equal amounts of resin and hardener into the mixing cup.
You can check out our resin coverage calculator to determine how much you need.
TIP - Mix a little more than you think you need because you want to cover your work completely in one go and not have to mix more later.
MIX CAREFULLY AND FOR A LONG TIME
Mix really well - at least 3 minutes. Scrape the sides and bottom to make sure you are thorough (unmixed material will leave sticky spots that won't harden). Once the resin and hardener are combined, you have about 45 minutes of working time before the resin thickens and hardens.
DISSEMINATION
After making sure your work is flat (use a cotton pad), pour ArtResin® material over your work. Do not be afraid! It will start to smooth out on its own and you can apply it in place. Let the resin run over the edges and then just use a brush or spatula to clean it up. You will notice bubbles starting to rise to the surface. Many of them will self-pierce, but you can also pierce them yourself for a flawless finish - our artist torch/toho works great for this (see our how-to videos for details).
TIP - Wood panels are best suited for large works instead of canvas, as they do not sag under the weight of the resin.
WAIT
ArtResin® must be in a dust-free environment for several hours until it hardens.
After about 8 hours it will be sticky, but you can pour another layer if necessary.
After about 12 hours it is touch dry, and
Within 24 hours it is 95% cured.
It is fully cured within 72 hours.
CLEANING - If you want to reuse your mixing tools, wipe them with a paper towel before the resin dries.
Easy to use 1:1 mixing ratio; covers approx. 2 sq ft UV and HALS stabilized for unparalleled yellowing protection Non-toxic. Safe for home use when used in a well ventilated area. Well, VOCs. Well BPA. Well fumes. Non-flammable. Certified food safe. High-gloss. Self-levelling. Formulated specifically for art. Made in the USA. Be careful, you'll get hooked on it.
Voit lukea lisää sävyistä tästä.
Huomioi myös, että varaat tarpeeksi maalia projektiisi:
ArtRes's package of 2 x 0.47 l bottles and accessories in the picture + instructions in English.
MEASURE
With gloves on, pour equal amounts of resin and hardener into the mixing cup.
You can check out our resin coverage calculator to determine how much you need.
TIP - Mix a little more than you think you need because you want to cover your work completely in one go and not have to mix more later.
MIX CAREFULLY AND FOR A LONG TIME
Mix really well - at least 3 minutes. Scrape the sides and bottom to make sure you are thorough (unmixed material will leave sticky spots that won't harden). Once the resin and hardener are combined, you have about 45 minutes of working time before the resin thickens and hardens.
DISSEMINATION
After making sure your work is flat (use a cotton pad), pour ArtResin® material over your work. Do not be afraid! It will start to smooth out on its own and you can apply it in place. Let the resin run over the edges and then just use a brush or spatula to clean it up. You will notice bubbles starting to rise to the surface. Many of them will self-pierce, but you can also pierce them yourself for a flawless finish - our artist torch/toho works great for this (see our how-to videos for details).
TIP - Wood panels are best suited for large works instead of canvas, as they do not sag under the weight of the resin.
WAIT
ArtResin® must be in a dust-free environment for several hours until it hardens.
After about 8 hours it will be sticky, but you can pour another layer if necessary.
After about 12 hours it is touch dry, and
Within 24 hours it is 95% cured.
It is fully cured within 72 hours.
CLEANING - If you want to reuse your mixing tools, wipe them with a paper towel before the resin dries.
Easy to use 1:1 mixing ratio; covers approx. 2 sq ft UV and HALS stabilized for unparalleled yellowing protection Non-toxic. Safe for home use when used in a well ventilated area. Well, VOCs. Well BPA. Well fumes. Non-flammable. Certified food safe. High-gloss. Self-levelling. Formulated specifically for art. Made in the USA. Be careful, you'll get hooked on it.
Voit lukea lisää sävyistä tästä.
Huomioi myös, että varaat tarpeeksi maalia projektiisi:
